
When it comes to gaming mice, you know the drill: premium performance usually means premium price. But what if your wallet's as empty as your inventory after a boss fight? Enter AliExpress dupes— mice that promise the looks and feels of top-tier brands like Razer for a fraction of the cost. Can they hold their own against a legend like the Razer DeathAdder V3 HyperSpeed?
We're comparing the DeathAdder with two budget contenders from AliExpress: the Metaphyuni Metapanda P1 Pro and the Attack Shark R1. These dupes may look the part, but can they match up where it matters?
(Spoiler alert: only one mouse will emerge victorious but second place might surprise you 🐭🎮 )

The Mice: Razer's Reign vs. AliExpress Ambition
The Razer DeathAdder V3 HyperSpeed, priced at $100 USD, is lightweight at 55 grams and engineered for precision. Its Focus X 26K optical sensor and third-generation optical switches make it a weapon of choice for competitive gamers. Every design element feels intentional, from the wide PTFE feet to the light balanced weight.
The Metaphyuni Metapanda P1 Pro, priced at $40 USD, tries to emulate the DeathAdder's style while delivering solid performance. It uses a PixArt PAW3395 sensor, and weighs 64.5-grams. Its weight gives it a heavier feel, and while the design is remarkably similar to the DeathAdder's, some shortcuts in quality and features are apparent.
Then there's the Attack Shark R1, the true budget warrior at $20 USD. It's heavier than the DeathAdder at 63.3 grams and uses a PixArt PAW3311 sensor. The design is reminiscent of its higher-priced counterparts, but its build feels noticeably cheaper, and its performance struggles to keep up under pressure.
Here's the spec breakdown for the numbers nerds:
Feature | Razer DeathAdder V3 HyperSpeed | Metapanda P1 Pro | Attack Shark R1 |
---|---|---|---|
Sensor | Focus X 26K Optical Sensor | Pixart PAW 3395 Optical Sensor | PixArt PAW3311 Optical Sensor |
Max DPI | 26,000 | 26,000 | 18,000 |
Switch Type | Optical Mouse Switches Gen-3 | Kailh Black Mamba switches | Huayu Switches |
Feet | PTFE (wide) | PTFE (minimal split) | PTFE (minimal split) |
Polling Rate (Wireless) | 8000 Hz | 1000 Hz | 1000 Hz |
Weight | 55g | 64.5g | 63.3g |
Price | $100 USD | $40 USD | $20 USD |
Design and Build: The Devil in the Details
At a glance, the Metapanda P1 Pro and Attack Shark R1 could easily be mistake for the DeathAdder's less glamourous siblings. Just look at the 3D scan below, the DeathAdder overlaid with the Metapanda P1 Pro, they are so similar! The ergonomic curves and overall shroud mimic Razer's design, but the differences become clear with closer inspection.
(Below: GIF of 3D scans of Metapanda P1 Pro and the DeathAdder. Red is the DeathAdder, White is the Metapanda P1 Pro.)

The DeathAdder's DPI/profile button placement underneath the mouse is an elegant touch, reducing clutter and keeping the aesthetic clean, albeit a bit inconvenient. In contrast, both dupes place their DPI button on top.
The mouse feet further highlight the disparities. Razer's wide PTFE feet provide effortless glide across a mousepad, but the dupes opt for smaller split feet. Surprisingly, the P1 Pro offers a smooth glide that matches, if not glides better. The Attack Shark R1, on the other hand, simply does not compare. Hold on to this, as we will discuss more about friction later in this article.
The scroll wheel also underscores the quality gap. The DeathAdder offers tactile, satisfying notches that feel deliberate and precise. Both dupes compromise here, with shallow notches that are functional, but it lacks the satisfying "click" you expect from a premium mouse.
1 of 5
Performance Breakdown: Do Sensors and Switches Really Matter?
In performance tests, the DeathAdder V3 HyperSpeed's Focus X 26K optical sensor was in a league of its own. It delivered flawless tracking even at high DPI settings, making it perfect for fast-paced shooters and precise creative tasks. Its sub-2ms wireless latency and 8000 Hz polling rate ensure every movement is instantaneous, giving players a competitive edge.
The Metapanda P1 Pro's PixArt PAW3395 sensor was impressive for its price. It handled lower DPI settings well and maintained consistent tracking during most gameplay. However, rapid movements occasionally exposed its limits, and its latency of 10.4 ms made it feel more like a productivity mouse than a gaming powerhouse.
The Attack Shark R1 struggled the most, though not very far behind the P1 Pro. Its PixArt PAW33111 sensor showed noticeable jitter during fast movements, and its 10.8 ms latency felt sluggish compared to the competition. For casual use or basic tasks, it gets the job done, but its lack of precision and responsiveness is evident in demanding scenarios.

Keep in mind that an average of 10 ms isn't awful, it's fine for casual gaming, but compares closer to productivity mice, such as the Logitech MX Master 3S, rather than a gaming mouse like a G309.
1 of 3
1 of 3
Friction Test: Soon™
Movement quality can make or break a gaming mouse. So we're adding a Friction Test to our arsenal to measure the effort needed to move a mouse across a mousepad. Interested in seeing some of the behind-the-scenes of our current tests? Check out our post on how we test mice. But for now, here's a sneak peek at the Friction Test results for today's competitors.
The DeathAdder's wide PTFE feet glide effortlessly, though may require a brief break-in period for optimal performance.
The Attack Shark R1 struggled in this department. Its feet provided a rough and inconsistent glide, which became more noticeable during fast-paced gameplay. Using it felt like extra effort was needed to compensate for its lack of smoothness.
The Metapanda P1 Pro, however, surprised us all with its slick out-of-the-box glide, needing minimal effort for quick flicks in games. It delivered the smoothest glide out of the three. In fact our mice testing expert preferred this one's glide over the DeathAdder.

Final Verdict: Worth the Grind or Go Budget?
After hours of testing, the Razer DeathAdder V3 HyperSpeed stands tall as the ultimate gaming mouse. Its unmatched precision, ergonomic design, and superior build quality make it worth every penny for serious gamers. However, the $100 price tag is undeniably steep.
Coming in second place, the Metaphyuni Metapanda P1 Pro is an excellent middle-ground option. For $40, it delivers solid performance that's suitable for casual gamers or anyone looking for decent functionality on a budget. Not to forget the unexpectedly smooth feet. While it can't rival the DeathAdder in raw performance, it offers an impressive compromise.
The Attack Shark R1 is best described as a backup mouse or an option for light use. At $20, it's fine for basic tasks, but it won't satisfy gamers who demand precision or reliability.
If you're looking to dominate leaderboards and can justify the cost, the DeathAdder is the obvious choice. If budget is a concern but you still want respectable performance, the Metapanda P1 Pro is a surprisingly capable contender. Just know that no budget option can fully replicate the experience of a high-end mouse like the DeathAdder.
None of these fits your gaming style or budget? Check out some of the other mice we have reviewed to find one that fits your gaming style. 🎮🖱️
--- END